Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!pdn!boake2!jc3b21!fgd3
From: fgd3@jc3b21.UUCP (Fabbian G. Dufoe)
Newsgroups: comp.sys.amiga.tech
Subject: Re: RAD:
Message-ID: <749@jc3b21.UUCP>
Date: 13 Sep 89 04:50:21 GMT
References: <6757@dayton.UUCP>
Distribution: usa
Organization: St. Petersburg Jr. College, FL
Lines: 22

From article <6757@dayton.UUCP>, by joe@dayton.UUCP (Joseph P. Larson):
> Anyways, I wanted to try something -- make a larger RAD:.  It complained
> when I changed the highcyl value to 120 -- "Not a DOS disk".  So I changed
> it back to 79 and created a second RAD: entry, renaming it to RD2:, and
> tried that.  Machine eventually crashed.

     Did you make a renamed copy of your RAD: handler and edit it to have a
different name or did you just rename RAD: with a relabel command?  I ran a
second RAD: for a while and it worked OK.

     Copy sys:devs/ramdrive.device to sys:devs/ramdriv2.device.  The use a
disk editor to change "ramdrive" to "ramdriv2" and "RAMB0" to "RAMB1" in
ramdriv2.device.  Then add a second mountlist entry for RD2:, for example.

     I hope I have't left out anything.

--Fabbian Dufoe
  350 Ling-A-Mor Terrace South
  St. Petersburg, Florida  33705
  813-823-2350

UUCP: ...uunet!pdn!jc3b21!fgd3