Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!ingr!phil
From: phil@ingr.com (Phil Johnson)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Help.  Lattice & UnHunk
Message-ID: <6437@ingr.com>
Date: 19 Sep 89 14:13:42 GMT
References: <1602@tellab5.tellabs.CHI.IL.US>
Reply-To: phil@ingr.UUCP (Phil Johnson)
Distribution: na
Organization: Intergraph Corp. Huntsville, Al
Lines: 19

In article <1602@tellab5.tellabs.CHI.IL.US> gad@tellab5.UUCP (Greg Deuerling) writes:
>Has any one out there used a program called UNHUNK posted by Eric Black a 
>few years ago ?  I've been trying to use UNHUNK & LATTICE 5.0 to write
>romable code for a 68000 project I have been working on.  My test program is

This would NOT be a problem if Lattice would provide the Amiga user with
the same tools they provide to the MSDOS community.  I have ask for an Amiga-
based C cross compiler like their little BLUE one, but to no avail.  Come to
think of it WHY hasn't SAS Institute ported their SAS product to the Amiga?

A better solution (in that I use the Lattice 5.x compiler) would be to support
ROMable code generation from the compiler.



-- 
Philip E. Johnson                    UUCP:  usenet!ingr!b3!sys_7a!phil
MY words,                           VOICE:  (205) 772-2497
MY opinion!