Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!mcsun!unido!tub!db0tui11!MERTENS
From: MERTENS@DB0TUI11.BITNET
Newsgroups: comp.sys.atari.st
Subject: Spectre 128 & Lightspeed Pascal, help.
Message-ID: <406@DB0TUI11.BITNET>
Date: 14 Sep 89 20:26:55 GMT
Reply-To: MERTENS@DB0TUI11.BITNET ()
Organization: TU Berlin
Lines: 17
Disclaimer: Author bears full responsibility for contents of this article

I've purchased a Spectre 128, Version 1.9F a few weeks ago and am very
heappy with the nice little thing. No problems so far.

But then I transfered Lightspeed Pascal Version 1.0 from my MacPlus to
the Spectre and tried to run a little project.

LSP responded with "Can't run your project due to a memory blockage, perhaps
a desk accessory?" - But there was no deskaccessory active. Decreasing the
stack and zone sizes didn't do any good.

I'm running Finder/System 5.3 which does fine with LSP on my MacPlus
on an Atari Mega 1 (1MB RAM) with 837KB free in MacMode. Can anyone
give me some hints on how to get LSP running a project?

Thanx for any help,

Steve  (MERTENS@DB0TUI11) or (MUELLERD@DB0TUI11).