Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!ssbell!mcmi!dsndata!wayne
From: wayne@dsndata.uucp (Wayne Schlitt)
Newsgroups: comp.sys.hp
Subject: Re: HP 9000/236 documentation?
Message-ID: <WAYNE.89Sep13170009@dsndata.uucp>
Date: 13 Sep 89 22:00:11 GMT
References: <16918@pasteur.Berkeley.EDU> <5570288@hpfcdc.HP.COM>
Sender: wayne@dsndata.UUCP
Organization: Design Data
Lines: 22
In-reply-to: stroyan@hpfcdc.HP.COM's message of 8 Sep 89 17:29:33 GMT


In article <5570288@hpfcdc.HP.COM> stroyan@hpfcdc.HP.COM (Mike Stroyan) writes:
> 
> > Does anyone have any documentation on hp9236?  In particular, how to
> > program the DMA controller, hpib interface, etc.
> > 
> > Is it possible to borrow/buy them?
> 
> The manual Bob Niland referred to is "Pascal System Internals
> Documentation", part number 98615-90075.  You can order the manual from
> HP's Direct Marketing Division at phone number 800-538-8787

the manual that we have with the part number 98615-90075 is titled
"Pascal 3.0/3.1 System Designer's Guide".  the one we have was printed
in 1985 and we have been told that there are no newer versions of this
manual.  

is this true?  are there any other manuals that go into how to program
the hardware on the newer computers?


-wayne