Xref: utzoo comp.unix.questions:16403 comp.sys.ibm.pc:34904
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!gem.mps.ohio-state.edu!ginosko!uunet!conch!steve
From: steve@conch.UUCP (Steve Froeschke)
Newsgroups: comp.unix.questions,comp.sys.ibm.pc
Subject: Adaptec 2372 RLL Controller Question
Keywords: RLL Adaptec 2372
Message-ID: <302@conch.UUCP>
Date: 19 Sep 89 00:53:16 GMT
Followup-To: poster
Organization: KEY'S Paradise BBS Key West, FL.
Lines: 34


Hello Networld.....

I've recently come into possession of an Adaptec 2372 RLL controller,
and would like to make it the second controller in my Unix box.

My current configuration is:

DTK 386 20Mhz motherboard with 4 meg of memory.
Bulk standard 16 bit MFM hard/floppy controller.

And I'm running Interactive Unix version 3.2

What my question is: What a the jumper settings on the Adaptec
controller?  Is there any way to address this as the second hard
controller?

I know Interactive Unix 'allows' addition of another controller, (or
so the 'manuals' say! :-)

Has anyone tried this?   Can any of you fine people out there help me
out with the jumpers on the Adaptec controller, and what they do?

Any and all information would be greatly appreciated and will be posted
back out to the net for others use.

Thank you all in advance.

       Steve
-- 
---------------------------------------------------------------------------
     If it moves, Salute it, if it doesn't paint it gray and sail it!
---------------------------------------------------------------------------
Steve Froeschke         |  uunet!conch!steve