Path: utzoo!mnetor!tmsoft!masnet!canremote!hugh.marks
From: hugh.marks@canremote.uucp (HUGH MARKS)
Newsgroups: comp.sys.ibm.pc
Subject: Re: SPERRY LASER MODEL 37
Message-ID: <89091907155425@masnet.uucp>
Date: 19 Sep 89 03:53:00 GMT
Organization: Canada Remote Systems Limited, Mississauga, ON, Canada
Lines: 11

I am unable to start up (boot) my Model 37 with font 8 (12/12 Helvetica).
The machine defaults to font 1 which is 10 pitch Courier and I'm forced
to issue the FRPO software command to get font 8.  

Can anyone tell me if it is at all possible to configure the laser to 
default to font 8.  I've set the C3 paramater to 8, however, it does not
seem to have any effect.

The firmware is 1.0C-1s, released 9/86.
---
 ~ DeLuxe 1.11a10 #736