Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!sun-barr!texsun!letni!merch!cpe!adaptex!neese
From: neese@adaptex.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Adaptec 2372 RLL Controller Questio
Message-ID: <6100014@adaptex>
Date: 19 Sep 89 18:58:00 GMT
References: <302@conch.UUCP>
Lines: 23
Nf-ID: #R:conch.UUCP:302:adaptex:6100014:000:584
Nf-From: adaptex.UUCP!neese    Sep 19 13:58:00 1989


I am assuming a ACB-2372 (non A,B,C) comtroller, but here are the jumper
settings and what they mean for making the controller a secondary controller.
Of course, the OS may or may not work with the secondary scheme, but here
it is.

x = Installed
o = Not Installed

Jumper	Pins	x/o	Means
J14	1	o	Primary Port Address 0x1f0-0x1f7 (Default)
		x	Secondary Port Address 0x170-0x177
J19	1-2	x	IRQ14 (Default)
	2-3	x	IRQ15
	3-4	o	DO NOT USE

Hope this helps.


			Roy Neese
			Adaptec Central Field Applications Engineer
			UUCP @ {texbell,attctc}!cpe!adaptex!neese
				merch!adaptex!neese