Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!att!laidbak!obdient!ddsw1!ddsw1!point!wek
From: wek@point.UUCP (Bill Kuykendall)
Newsgroups: comp.sys.ibm.pc
Subject: Re: PCs Limited (Dell) 286's & Lotus 3.0
Message-ID: <[1919.5]comp.ibmpc;1@point.UUCP>
Date: 21 Sep 89 04:00:05 GMT
References: <[1919]comp.ibmpc@point.UUCP> <25107377.18260@maccs.dcss.mcmaster.c
Lines: 10

Final Resolution of Problem:

A combination of the latest bios chips from Dell, and setting the
environment variable DOS16M=10 did the trick.  (It needed *both*)

Thanks much to the responders, especially Dr. Scump for the info on the
DOS16M variable.  I haven't extensively searched the full documentation, but
this info was not in the installation booklet.  

--