Path: utzoo!attcan!uunet!dino!sharkey!mailrus!ukma!pjl
From: pjl@ms.uky.edu (Paul Linton)
Newsgroups: comp.unix.aix
Subject: Re: RT running AIX w/Ethernet card....suggestions wanted.
Summary: Thanks everyone
Keywords: Ungermann Bass card, RT, AIX, etc
Message-ID: <12741@s.ms.uky.edu>
Date: 22 Sep 89 01:21:30 GMT
References: <12724@s.ms.uky.edu> <573@pan.UUCP>
Organization: University of Kentucky
Lines: 26

In article <573@pan.UUCP>, jw@pan.UUCP (Jamie Watson) writes:
> In article <12724@s.ms.uky.edu> pjl@ms.uky.edu (Thats me) writes:
> >I have seen many people posting about using their RT's with ethernet.
> >the devices command and I am pretty sure I need to.  I enter and go
> >to the 'add' function.  But there does not seem to be any available choices
> >for adding it.
> You need to add the VRM device driver for the Baseband Adapter.  After
> you do that, when you run the "devices" command you will see that it
> has a new option, for "adapters".  That is what you are looking for.
> 
> jw

  Ok, thanks everyone that replied.  i got many suggestions, all which
boiled down to what Jamie Watson said (and John from IBM).  I should have
my VRMDD disks tomorrow.  (Unfortunately whoever used the machine before
my job started deleted everything they thought was not important and THEN
took all the installation disks, sigh).

  Thank _everyone_!

     Paul Linton (AIX flunky)
-- 
Paul Linton      UKCC Consultant.                University of Kentucky.
...!ukma!pjl                Lexington, Kentucky. 
pjl@ms.uky.edu, pjl@ukma.bitnet  or (different machine) plinton@ukcc
Different all twisty a of in maze are you, passages little.