Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!genrad!decvax!jfcl.dec.com!imokay.dec.com!jeff
From: jeff@imokay.dec.com (Jeff Janock)
Newsgroups: comp.unix.ultrix
Subject: Re: Ethernet support for Ultrix 1.2
Keywords: LAT
Message-ID: <492@imokay.dec.com>
Date: 6 Sep 89 12:23:33 GMT
References: <671@UALTAVM.BITNET> <7803@cbmvax.UUCP>
Reply-To: jeff@imokay.enet.dec.com (Jeff Janock)
Distribution: na
Organization: Digital Equipment Corp. Boxboro, MA
Lines: 17

In article <7803@cbmvax.UUCP> grr@cbmvax.UUCP (George Robbins) writes:
>LAT was there, but may not have been "supported".

LAT was only supported for the DECServer 100 - the 200's were
not supported...  downline loads could be offloaded from VMS as 
our VMS engine was a VAX730 back then!  (ethernet device: DEQNA)

I would also like say that Ultrix V1.2 was/is a very stable product.
It is still running on the machine of my previous employer with
no problems.  The only outages occur when there are hardware 
problems (RA81's or 780HW).  

cheers,	-jj

-- 
Jeff Janock,  CMW Project - Digital Equipment Corporation; 508-264-5191
jeff@imokay.enet.dec.com