Path: utzoo!utgpu!watmath!att!tut.cis.ohio-state.edu!cs.utexas.edu!mailrus!sharkey!hfhrv!brian
From: brian@hfh.edu (Brian A. Wolfe)
Newsgroups: comp.unix.ultrix
Subject: TK50 firmware rev's
Keywords: TK50
Message-ID: <1989Sep21.135120.7228@hfh.edu>
Date: 21 Sep 89 13:51:20 GMT
Reply-To: brian@hfhrv.UUCP (Brian A. Wolfe)
Organization: Henry Ford Hospital, Detroit Michigan
Lines: 30


>I'm running UWS2.1 on a VAXstation3100. The problem I'm going to
>describe also occurred under UWS2.0A.
>
>The first time I access the SCSI-TK50 unit after a reboot, I get the
>following entry in my errlog:

I just got this same message on a Vax 11/750 with a TTI
8mm CTS-8 (emulates a TK50), this is under Ultrix 2.2.

>
>----- EVENT INFORMATION -----
>
>EVENT CLASS                             OPERATIONAL EVENT 
>OS EVENT TYPE                  250.     ASCII MSG 
>SEQUENCE NUMBER                  2.
>OPERATING SYSTEM                        ULTRIX 32 
>OCCURRED/LOGGED ON                      Tue Sep 12 17:10:39 1989 MET DST
>OCCURRED ON SYSTEM                      squirrel 
>SYSTEM ID                 x0A000004     MICROCODE REV = 4.
>SYSTYPE REG.              x04010002
>					FIRMWARE REV = 1.
>PROCESSOR TYPE                          KA420 
>MESSAGE                                 CAUTION: TK50 unit 5 firmware revision 
>					_is 34, should be 45 or later! 
-- 
Brian Wolfe            Internet: brian@hfh.edu  BITNET: USERW18Y@UMICHUM
Systems Analyst        UUCP:     {rutgers,itivax,uunet}!sharkey!hfhrv!baw
Henry Ford Hospital    Voice:    (313)-876-7461
Detroit MI 48202       FAX:      (313)-875-0315