Xref: utzoo comp.sys.att:7546 unix-pc.general:3718 unix-pc.uucp:144
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!psueea!qiclab!ditka!kls
From: kls@ditka.UUCP (Karl Swartz)
Newsgroups: comp.sys.att,unix-pc.general,unix-pc.uucp
Subject: Re: How do you check if ph0 is set to DATA?
Summary: Does ph0 work at all with DATA?
Message-ID: <4185@ditka.UUCP>
Date: 12 Sep 89 07:21:42 GMT
References: <2938@puff.cs.wisc.edu>
Reply-To: kls@ditka.UUCP (Karl Swartz)
Distribution: usa
Organization: Inaction Central, Los Alamos, New Mexico
Lines: 16

In article <2938@puff.cs.wisc.edu> upl@puff.cs.wisc.edu (Future Unix Gurus) writes:
>I only have one phone line, so I can't dedicate it to a DATA line.

>If ph0 is set to DATA ...

I was under the (possibly misguided) impression that due to
software bugs ph0 didn't work very well as a data line.  I
have both of my machines set up with ph0 as VOICE (but no
line hooked up since the software isn't terribly useful) and
ph1 as the DATA line.

-- 
Karl Swartz	|UUCP		{ames,lll-winken}!pacbell!ditka!kls
1-505/672-3113	|Internet	kls@rt1.lanl.gov
		|BIX		kswartz
"I never let my schooling get in the way of my education."  (Twain)