Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!pyrdc!grebyn!scotth
From: scotth@grebyn.com (Scott Hutchinson)
Newsgroups: comp.dcom.lans
Subject: Re: Novell Printing
Keywords: MSWord and Postscript files
Message-ID: <13991@grebyn.com>
Date: 4 Oct 89 17:01:52 GMT
References: <160@metapyr.UUCP>
Reply-To: scotth@grebyn.UUCP (Scott Hutchinson)
Distribution: usa
Organization: Chantilly, VA, USA
Lines: 36


	Generally speaking the problem you are having is most likely in
one of two places.

1) The most likely place is in you print job configuration.  You will
want to have the print job set up as follows:
	You want Bytw Stream set on.
	set autoendcap to no
	Set the device to hp_laserjet series 2+
	Set the mode to (re-initialize)
	Set the timeout to about 5 Second.

2) The other place the problem could be is in Word, check to make sure
that Word knows it's talking to a Hp laserjet.

	Note, the above is for printing MS Word Documents to a HP
laserjet +.  The Laserjet is not a Postscript printer, so printing
postscript files to it is going to be a tad more dificult.  I've heard
of a cartrige that makes the Laserjet Postscript compatable, but if I
remember correctly it was rather expensive.



			-Scott Hutchinson
			 Systems Programmer/Network Manager
			 VANCE Systems Inc.
			 Chantilly, VA 
			 (703) 471-9402



-- 
                                     -Scott H. Hutchinson
Standard Disclamers:  These opinions are mine, they do not reflect on my
                      Company at all.
I can be reached at scotth@grebyn.com or grebyn!scotth