Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!gem.mps.ohio-state.edu!ginosko!uunet!pdn!boake2!jc3b21!fgd3
From: fgd3@jc3b21.UUCP (Fabbian G. Dufoe)
Newsgroups: comp.sys.amiga
Subject: Re: Not accepted DIR command
Message-ID: <762@jc3b21.UUCP>
Date: 4 Oct 89 16:18:39 GMT
References: <3831@vtt.vtt.fi> <8057@cbmvax.UUCP> <198@grape3.UUCP>
Organization: St. Petersburg Jr. College, FL
Lines: 15

In article <198@grape3.UUCP>, king@cell.mot.COM (Steven King) recommends
using "path ram: add" to access commands copied to RAM: instead of
re-assigning C:.  

That's fine, but be aware that new shells opened from Workbench icons or
PopCLI won't be aware of that path.  Path isn't global, although it will be
inherited if you issue a NewCLI or NewShell command from a shell that
already had a path assignment.

--Fabbian Dufoe
  350 Ling-A-Mor Terrace South
  St. Petersburg, Florida  33705
  813-823-2350

UUCP: ...uunet!pdn!jc3b21!fgd3