Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!ginosko!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!zardoz!infotec!chad
From: chad@infotec.UUCP (Chad Nikoletich)
Newsgroups: comp.sys.amiga
Subject: HP LaserjetII Info Needed
Keywords: laser, WB1.3, A1000
Message-ID: <352@infotec.UUCP>
Date: 10 Oct 89 19:27:56 GMT
Distribution: na
Organization: Infotec Development Inc., Costa Mesa, CA
Lines: 13

Well, I was lucky enough the other day to get a friend to
loan me his HP Laserjet II for awhile.  Unfortunately, he
did not have the manual available.  Anyway, I hooked it up using
the parallel interface on my A1000.  I then went to Prefs and changed the
printer to Laserjet and dumped my directory to the printer. And indeed the
output from the printer was exactly as expected.  I then tried to do a
graphic dump of the WB1.3 screen and lo and behold, nothing but a blank 
sheet came out.  I tried to do a graphics print from Digipaint and ProWrite
and the same results- a blank sheet.  I'm completely clueless to the cause
of this.  Is there something I'm missing?  Any help would be appreciated.

Desperately Seeking Graphics
Chad  {..sun!sunkist!infotec!chad}