Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!brutus.cs.uiuc.edu!psuvax1!rutgers!uwvax!astroatc!nicmad!madnix!aaron
From: aaron@madnix.UUCP (Aaron Avery)
Newsgroups: comp.sys.amiga.tech
Subject: Re: net: help
Keywords: locking
Message-ID: <933@madnix.UUCP>
Date: 11 Oct 89 09:05:56 GMT
References: <7222@thor.acc.stolaf.edu>
Reply-To: aaron@madnix.UUCP (Aaron Avery)
Organization: ASDG Incorporated
Lines: 20

In article <7222@thor.acc.stolaf.edu> henning@thor.acc.stolaf.edu (Mark D. Henning) writes:
>I am able to get the net to work properly at speeds of 19200 and
>lower.  I am also able to get the net to work for a limited time at
>31250.  Dnet connects fterm at 57600, but netmount will not function.

Are you doing this on the built-in Amiga serial port? That port can't
reliably receive at speeds greater than 19,200 bps, when using the
serial.device. Sends are ok, but they generally don't go out at full speed.

My suggestion for speed is to use Matt's new parallel network stuff, or get
an expansion serial port which can reliably send AND receive at speeds of
57,600 bps and greater. We produce such a board.

- Aaron

-- 
Aaron Avery, ASDG Inc.         "A mime is a terrible thing to waste."
                                                             -- Robin Williams
ARPA: madnix!aaron@cs.wisc.edu   {uunet|ncoast}!marque!
UUCP:   {harvard|rutgers|ucbvax}!uwvax!astroatc!nicmad!madnix!aaron