Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!gem.mps.ohio-state.edu!apple!oliveb!amiga!cbmvax!grr From: grr@cbmvax.UUCP (George Robbins) Newsgroups: comp.sys.amiga.tech Subject: Re: Motherboard upgrades (Was: Re: Rev. 6.0 & 6.1 Motherboards.) Message-ID: <8160@cbmvax.UUCP> Date: 12 Oct 89 19:03:09 GMT References: <0897.AA0897@tronix> <337@syteke.be> <4684@amiga.UUCP> Reply-To: grr@cbmvax.UUCP (George Robbins) Organization: Commodore Technology, West Chester, PA Lines: 15 In article limonce@pilot.njin.net (Tom Limoncelli) writes: > I have a 4.x motherboard and I would love to bring it up to 6.2 > standings (1meg agnus, all the resistors cut or added, etc). I also > have a "Cherry" keyboard, and I'd love to have it's problems "clipped" > (so to speak). 4.x mother boards can't be upgraded to 6.x, since it's an entirely different PCB. The service centers have a summary of all applicable changes to 4.x boards, beyond that you'd have to pay for a board swap. -- George Robbins - now working for, uucp: {uunet|pyramid|rutgers}!cbmvax!grr but no way officially representing arpa: cbmvax!grr@uunet.uu.net Commodore, Engineering Department fone: 215-431-9255 (only by moonlite)