Path: utzoo!attcan!uunet!cs.utexas.edu!uwm.edu!gem.mps.ohio-state.edu!tut.cis.ohio-state.edu!ucbvax!pro-lep.cts.com!j_p
From: j_p@pro-lep.cts.com (Jason Perez)
Newsgroups: comp.sys.apple
Subject: Postscript
Message-ID: <8910101319.AA14383@trout.nosc.mil>
Date: 10 Oct 89 02:16:20 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 16


  Here's a summary of the replies I've received.
   Yes, the GS will do Postscript.  Copy the later Lserwriter driver from the
System Tools Disk (it's about 81 blocks) to your xx/system/drivers directory. 
Then when you want to print a file, just do as usual, but hold down Apple-F
when you press the OK button, a POSTSCRIPT file will be generated in your
xx/system/drivers director called Postscript.GS00.  Then I ported this over to
a MAC using the Apple File Exchange program.  Then using a PD program called
Send PS on the MAC, the file is download to a Laserwriter.  The downside to
this process is that I was only able to print fonts that the Laserwriter has
built in, but that's OK.
_____

UUCP: crash!pro-lep!j_p
ARPA: crash!pro-lep!j_p@nosc.mil
INET: j_p@pro-lep.cts.com