Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!tank!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uicsrd.csrd.uiuc.edu!dkchen
From: dkchen@uicsrd.csrd.uiuc.edu
Newsgroups: comp.sys.ibm.pc
Subject: Re: 3.5" Drive Help
Message-ID: <42900053@uicsrd.csrd.uiuc.edu>
Date: 11 Oct 89 22:51:00 GMT
References: <42900052@uicsrd.csrd.uiuc.edu>
Lines: 15
Nf-ID: #R:uicsrd.csrd.uiuc.edu:42900052:uicsrd.csrd.uiuc.edu:42900053:000:553
Nf-From: uicsrd.csrd.uiuc.edu!dkchen    Oct 11 17:51:00 1989


	I had a similar question a few weeks before. Thanks to those who
responded to my question.

	My experience (with my XT clone) is: I installed a Toshiba 720 KB 
internal floppy drive in the disk drive slot. Then I connected the cable from 
the floppy controller (which resides on my multifunction card, it can be used 
with up to two low density drives, 360KB or 720KB). And got a hold of DOS 3.3 
(or higher), add one line
	device=d /1
in the config.sys file. It's done.

	If you have any question, I'd be glad to share more detail with you.

Dingkai