Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!think!husc6!sunfs3!kent
From: kent@sunfs3.camex.uucp (Kent Borg)
Newsgroups: comp.sys.mac
Subject: Re: Upgrade Memory on SE/030
Message-ID: <519@sunfs3.camex.uucp>
Date: 2 Oct 89 17:41:13 GMT
References: <12679@orstcs.CS.ORST.EDU> <1989Sep28.200958.24055@polyslo.CalPoly.EDU>
Reply-To: kent@lloyd.UUCP (Kent Borg)
Organization: Camex, Inc., Boston, Mass USA
Lines: 16

In article <1989Sep28.200958.24055@polyslo.CalPoly.EDU> dorourke@polyslo.CalPoly.EDU (David M. O'Rourke) writes:
>ghe@nucthy.physics.orst.edu (Guangliang He) writes:
>> [problems gettting good info on upgrading his machine.]
>
>  Your dealer is Wrong, you can add 4 addition simms of your choice to
>your SE/30 with out having to remove the existing 256K simms.  You can

Almost.  You can upgrade your SEx (aka SE/30) without *throwing away*
your 256K SIMMs, but you will have to remove them to move them over to
Bank B.  Bank B can never have more memory than Bank A--except in the
new IIci.

-- 
Kent Borg				"Then again I could be foolish 
kent@lloyd.uucp				 not to quit while I'm ahead..."
or					     -from Evita (sung by Juan Peron)
...!husc6!lloyd!kent