Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!gem.mps.ohio-state.edu!ginosko!uunet!peregrine!ccicpg!felix!dhw68k!thecloud
From: thecloud@dhw68k.cts.com (Ken McLeod)
Newsgroups: comp.sys.mac
Subject: Re: Continuum
Message-ID: <26961@dhw68k.cts.com>
Date: 8 Oct 89 09:31:32 GMT
References: <2769@phred.UUCP> <22780@cup.portal.com>
Reply-To: thecloud@dhw68k.cts.com (Ken McLeod)
Distribution: na
Organization: Wolfskill & Dowling residence; Anaheim, CA (USA)
Lines: 18

In article <22780@cup.portal.com> MacUserLabs@cup.portal.com (Stephan - Somogyi) writes:
>I've run Continuum on an SE/30; worked fine.

  I couldn't get Continuum 1.01 to run on my IIcx (System 6.0.4), even in
1-bit mode. Usually, the startup dialog (with 'Quit' and 'Reserve 2nd Screen')
would go into an endless loop, where clicking either button simply brought
the dialog back up again. A couple of times, though, I got as far as the
High Scores screen, at which point a mouse click anywhere on the screen
resulted in a bus error. Haven't tried earlier systems on the IIcx, so I
don't know whether the incompatibility is due to 6.0.4, or the IIcx....
of all the software I've tried so far on the IIcx, though, only Continuum
and MacLanding have failed to run. (Did I mention the IIcx has 5MB? :-)

-- 
==========     .......     =============================================
Ken McLeod    :.     .:    UUCP: ...{spsd,zardoz,felix}!dhw68k!thecloud
==========   :::.. ..:::   INTERNET: thecloud@dhw68k.cts.com
                ////       =============================================