Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!ginosko!gem.mps.ohio-state.edu!apple!motcsd!hpda!hpcupt1!rterry
From: rterry@hpcupt1.HP.COM (Ray Terry)
Newsgroups: comp.sys.mac
Subject: Re: red ryder over printer port
Message-ID: <-286499978@hpcupt1.HP.COM>
Date: 10 Oct 89 02:52:05 GMT
References: <1610@hjuxa.UUCP>
Organization: Hewlett Packard, Cupertino
Lines: 22


>When I attempt to use red ryder 9.4  over the printer port on
>my cx, It doesn't seem to be able to connect to the printer port.
>DTR doesn't raise, nor do I get any data going out to the port.
>(yes, I did select printer port in the Terminal preferences)
>The package does work over the modem port.

9.4 is pretty old and I don't think it is even supported anymore (since the
release of 10.x).  I do know that v11 works just fine over the printer port
as that is the port that I'm currently using as I type this...  v11 should 
be available very soon.

Ray

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Ray Terry                            Hewlett Packard Company  /HPG200/02
GEnie : R.Terry                      MacNET: Ray
Packet: N6PHJ @ N6IIU                UUCP  : sun!hpda!hpcupt1!rterry
Domain: rterry%hpda@hplabs.hp.com    SysOp : MacScience BBS (408) 866-4933
IPaddr: 44.4.0.214 N6PHJ.norcal.ampr CIS   : 71150,735
                 Standard disclaimers, etc. apply...
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-