Path: utzoo!attcan!telly!lethe!torsqnt!jarvis.csri.toronto.edu!mailrus!wuarchive!wugate!uunet!crdgw1!lewis.crd.ge.com!welty From: welty@lewis.crd.ge.com (richard welty) Newsgroups: news.groups Subject: Re: rec.swl Message-ID: <2831486511@lewis.crd.ge.com> Date: 22 Sep 89 20:01:52 GMT References: <4918@shlump.nac.dec.com> Sender: news@crdgw1.crd.ge.com Reply-To: welty@lewis.crd.ge.com (richard welty) Followup-To: news.groups Organization: New York State Institute for Sebastian Cabot Studies Lines: 31 In article <4918@shlump.nac.dec.com>, Steve Dowman writes: *In article <2831476267@lewis.crd.ge.com>, welty@lewis.crd.ge.com (richard welty) writes... *{here's an alternative -- i've been wanting a general radio group *{for some time. create rec.radio; if it's dominated by dx, swl, or *{what have you, that's fine, but it would provide a place for other *{discussions of radio as well. * I believe rec.radio is much too broad for the original intent of forming * the group. I think a broad title like this would attract discussion of * local radio format/programming. Not that this is bad, but I don't think * we want to get bogged down in AM/FM music format discussion. Perhaps * there is interest out there for rec.radio.fm? the point was that we should consider creating general groups before creating niche groups; otherwise we get oddities like existing situation with rec.models.rc; there is a place specifically for discussion of rc models, but any other model-building discussion must go in rec.misc, despite the fact that there is a rec.models.* hierarchy. i know that the original charger of rec.models.rc allowed non-rc discussions, but last time i checked, if you actually tried it you got massively flamed by the pro-rc modelers in the group. if a rec.radio group gets bogged down with high volume on a specific topic, it's time to create the damn subgroup; e.g. rec.radio.swl, which i would guess is the most likely subgroup. richard -- richard welty 518-387-6346, GE R&D, K1-5C39, Niskayuna, New York ..!crdgw1!lewis.crd.ge.com!welty welty@lewis.crd.ge.com