Xref: utzoo news.software.b:3150 comp.unix.microport:3797
Path: utzoo!utgpu!attcan!uunet!ginosko!usc!apple!agate!shelby!decwrl!atha!aunro!myrias!dragos!ruiu
From: ruiu@dragos.uucp (dragos)
Newsgroups: news.software.b,comp.unix.microport
Subject: Re: C news on Microport 2.4
Message-ID: <1989Oct4.012448.9057@dragos.uucp>
Date: 4 Oct 89 01:24:48 GMT
References: <1989Oct1.094543.14743@trevan.uucp>
Reply-To: ruiu@dragos.UUCP (dragos)
Organization: Orbital Mind Control Lasers, Inc.
Lines: 22

In article <1989Oct1.094543.14743@trevan.uucp> trevor@trevan.uucp (Trevor J. Harris) writes:
>I am having problems with the batcher getting out of sync with about
>20 percent of my incoming batches. I just 'mv' these from the bad directory
>back into in.coming and they go through ok.
>I am runing cnews on Microport V/AT 2.4 with the small model and dbz with
>the following changes:
>Trevor J. Harris					ukc!trevan!trevor

 I was having this problem. I eliminated it by using a large model relaynews.
 I never tracked down the problem fully once I found a solution. I just built
 a duplicate source tree where I put the large model stuff. This way I can still
 patch the sources and keep separate versions of the cnews libraries.

 NOTE: the three fast stdio routines do not pass the tests in the large model,
 so you should make sure to avoid linking them in.


-- 
Dragos Ruiu          |  Programming Languages:
alberta!dragos!ruiu  |		
uunet!myrias!dr      |   find / -name \*\[fF\]77\* -exec rm -rf {} \;
bbs: (403) 439-0229  |