Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!dayton!joe
From: joe@dayton.UUCP (Joseph P. Larson)
Newsgroups: comp.sys.amiga
Subject: Re: Need multiple RAD:'s
Keywords: Can it be done?
Message-ID: <6801@dayton.UUCP>
Date: 13 Oct 89 14:28:15 GMT
References: <8788@spool.cs.wisc.edu> <3949@abaa.UUCP>
Reply-To: joe@dayton.UUCP (Joseph P. Larson)
Distribution: na
Organization: Dayton-Hudson Dept. Store Co.
Lines: 21

In article <3949@abaa.UUCP> esker@abaa.UUCP (Lawrence Esker) writes:
>Second, get a copy of NewZAP or some other binary file editor.  Yes, this is
>the hard part, but any well respecting Amiga Hacker should have this program.
>Use NewZAP to edit devs:ramdriv1.device and c:RemRF1.  In each program, replace
>all occurances of ramdrive with ramdriv1 and all occurances of RAMB0 with
>RAMB1.  (Program is ShareWare by someone I think is on this net.)

Okay.  Who's gonna either get a copy of NewZap posted to alt.sources.amiga
(or if Bob Page is still alive, get him to stick it in the moderated groups)?
And if the answer is "no one", then how about sending me a copy?

I tried to do this a month ago -- that is, tried 2 RAD disks.  Wasn't
surprised when it didn't work.  So then I tried vd0:, which worked for
a brief period, then stopped working for some reason -- after the next
cold boot, I believe.  Odd, eh?

So -- let's get NewZAP posted or otherwise generally available... -Joe
-- 
Life is a cabaret (old chum).
UUCP: rutgers!dayton!joe   (Picts 1-13 are   DHDSC - Joe Larson/MIS 1060
ATT : (612) 375-3537       now ready.)       700 on the Mall, Mpls, Mn. 55402