Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!sdrc!evgabb
From: evgabb@sdrc.UUCP (rob gabbard)
Newsgroups: comp.sys.amiga
Subject: SetCPU wipes out Path
Keywords: setcpu amiga path
Message-ID: <916@sdrc.UUCP>
Date: 19 Oct 89 22:17:03 GMT
Organization: SDRC, Cincinnati
Lines: 18

I've just started the SetCPU utility on my A2500. I've got the following
in my boot:s/startup-sequence:

	SetCPU FASTROM CARDROM <path to card rom file>

It seems to work OK except that the Path command that I also have in
there doesn't work :-( Any shells I start up have the default path.

Will I have to add the path to my shell-startup file to use SetCPU and why ?


-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Rob Gabbard (uunet!sdrc!evgabb)                 _    /|
Workstation Systems Programmer                  \'o.O'
Structural Dynamics Research Corporation        =(___)=   
                                                   U
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=