Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!apollo!tim
From: tim@apollo.HP.COM (Timothy R. Giebelhaus)
Newsgroups: comp.sys.ibm.pc
Subject: Re: SIMTEL20 - Where is it?
Message-ID: <46539096.20b6d@apollo.HP.COM>
Date: 19 Oct 89 20:22:00 GMT
References: <10153@cbnews.ATT.COM> <2081@leah.Albany.Edu> <5242@ubc-cs.UUCP>
Sender: root@apollo.HP.COM
Reply-To: tim@apollo.HP.COM (Timothy R. Giebelhaus)
Distribution: na
Organization: Hewlett-Packard Apollo Division - Chelmsford, MA
Lines: 17
Summary: tenex does not work

In article <5242@ubc-cs.UUCP> halliday@cc.ubc.ca (Laura Halliday) writes:
>You bet it's different! You must say either:
>
>	tenex

I have tried this but some how the the binaries did not arrive in good
shape.  An arc t worked part of the way and then it suggested a newer
version of arc.  I would able to run crc.exe (which was also transfered
from simtel), but crc reported all of the non-ascii files as messed
up.  Crc would not report whether it's own crc was correct.

Any information on what the problem is would be appreciated.  Thanks.

UUCP: tim@apcimsp.uucp
ARPA: tim@apollo.hp.com
Nobody I know admits to sharing my opinions.  I don't even have a pet
which will share my opinion.