Xref: utzoo comp.sys.mac.programmer:9843 comp.sys.mac.hypercard:2616
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!reed!lclark!dan
From: dan@lclark.UUCP (Dan Revel)
Newsgroups: comp.sys.mac.programmer,comp.sys.mac.hypercard
Subject: Re: Debugging XFCN's/XCMD's
Message-ID: <717@lclark.UUCP>
Date: 18 Oct 89 23:56:23 GMT
References: <5870@tank.uchicago.edu>
Reply-To: dan@lclark.UUCP (Dan Revel)
Organization: Lewis & Clark College, Portland OR
Lines: 8

From your description I would say that your best bet would be to
debug your code *before* making it into an XCMD/XFCN.  You could
even mock-up a program which calls your routine the way Hypercard
would.  Of course this won't work if you intend to make call-backs
or pass messages to Hypercard.
-- 
dan@lclark
tektronix!reed!lclark!dan			Dylsexics untie! (-|