Path: utzoo!attcan!telly!lethe!torsqnt!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: poffen@sj.ate.slb.com (Russ Poffenberger)
Newsgroups: comp.sys.sun
Subject: Re: Sun 3x <==> Sun 3 compatibility
Keywords: Miscellaneous
Message-ID: <1557@brazos.Rice.edu>
Date: 19 Sep 89 20:42:27 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 21
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 126, message 6 of 15

In article <1232@brazos.Rice.edu> adoyle@bbn.com (Allan Doyle) writes:
>X-Sun-Spots-Digest: Volume 8, Issue 109, message 8 of 12
>
>Scenario:
>
>	When I plug a 280 CPU into the system from which I have
>	pulled the 480 CPU, it does not boot. I have, of course, already
>	copied a kernel built on a 280 system into the root partition.
>	The boot program gives up right away because of a page mapping
>	problem.
>

Did you copy the correct version of /boot onto the hard disk? This is the
actual boot code. Also after copying, you must do an installboot on it (if
4.0.x, you didn't specify) to make it work.

Russ Poffenberger               DOMAIN: poffen@sj.ate.slb.com
Schlumberger Technologies       UUCP:   {uunet,decwrl,amdahl}!sjsca4!poffen
1601 Technology Drive
San Jose, Ca. 95110
(408)437-5254