Xref: utzoo comp.sys.tandy:1738 misc.wanted:6506
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ucdavis!ic2020!jim
From: jim@ic2020.UUCP (Jim Carter)
Newsgroups: comp.sys.tandy,misc.wanted
Subject: Re: Tandy 1000 printer pinouts needed
Message-ID: <226@ic2020.UUCP>
Date: 13 Oct 89 13:37:00 GMT
References: <1989Oct11.184704.26281@sun.soe.clarkson.edu>
Lines: 36

in article <1989Oct11.184704.26281@sun.soe.clarkson.edu>, billp@clutx.clarkson.edu (billp@clutx.clarkson.edu) says:
>    Help! Does anyone happen to know the pinouts of the Tandy 1000 parallel
> printer port?  ...
>    Thanks in advance for any help....   (post or better yet, e-mail)
> -Bill Plunkett  (billp@clutx.clarkson.edu -or- billp@clvm.bitnet)

I have a technical reference manual for the 1000A.  Looking at the drawing
of the parallel printer interface I see the following :

- name -   - on card edge -
ppdata0      03
ppdata1      05
ppdata2      07
ppdata3      09
ppdata4      11
ppdata5      13
ppdata6      15
ppdata7      17
ppstrobe*    01
ppautofeed*  32
ppinit*      30
ppbusy*      25
pppaem       23
ppack*       19
ppbusy       21
ppfault*     28

ground       2,4,6,8,10,12,16,18,20,22,24,27,31,33
n.c.         14,26,29,34

I have made a cable in the past, and I just connected 1 to 1, 2 to 2,...
strait thru.  Ignoring 35 & 36 on the centronix cable.
Hope it helps.
--
Jim Carter (Sequoia Contact Lens,1355 11th Street,Reedley,CA,93654)
{...!csufres!csuf3b!ic2020!jim} 209/638-3939, Fax 209/638-5433