Xref: utzoo comp.editors:1047 comp.sys.ibm.pc:37202 Path: utzoo!attcan!uunet!samsung!aplcen!jhunix!kishan_s From: kishan_s@jhunix.HCF.JHU.EDU (Sandeep Kishan) Newsgroups: comp.editors,comp.sys.ibm.pc Subject: Re: Cannot start WordPerfect on my pc6300 Message-ID: <3073@jhunix.HCF.JHU.EDU> Date: 27 Oct 89 02:03:35 GMT References: <2523@cbnewsd.ATT.COM> Reply-To: kishan_s@jhunix.UUCP (Sandeep Kishan) Followup-To: comp.editors Organization: The Johns Hopkins University - HCF Lines: 43 In article <2523@cbnewsd.ATT.COM> sokol@cbnewsd.ATT.COM (anatoly.s.belkin) writes: > >I am trying to use a WordPerfect 5.0 on my ATT PC 6300 and the problem I have is >after I start WP it brings up the first screen then says "Wait a moment" and never >comes back, hanging my machine. I tried this version on my friends pc and it works >fine. Had anyone ever see similar problems and what is the solution? > >Here is some more info on my system: > > 8086 based ATT PC 6300 > Momochrome monitor > 640 K RAM > 30 Meg Hard disk > WordPerfect 4.0 works fine > All dignostics of memeory and mother board pass > I am running DOS vesion 3.1 > According to the WP 5.0 manual: "If the screen or keyboard freezes when you are entering WordPerfect, you may need to use one or both of the following startup options: /NC, /NK." You would enter WP/NC or WP/NK when you start. NC: "disables the Cursor Speed feature. In rare instances, Cursor Speed may conflict with TSR [terminate and stay resident] software or some hardware. This is especially useful when WordPerfect does not start up at all." NK: "disables enhanced keyboard calls which are not recognized by some compatables and TSR . . . programs. This option is especially helpful if you are having trouble getting WordPerfect to start up (e.g. WordPerfect comes up and locks up)." My guess is that the NK command will work for you. Instead of invoking WordPerfect with "WP", start it with "WP/NK". Hope it works. Best wishes, Sandeep Kishan KISHAN_S@JHUNIX.HCF.JHU.EDU "The answer to the life, universe and everything . . . . 42."