Xref: utzoo comp.sys.ibm.pc:37147 comp.sys.misc:2530 comp.misc:7212
Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!usc!merlin.usc.edu!castor.usc.edu!asplund
From: asplund@castor.usc.edu (Daryl Asplund)
Newsgroups: comp.sys.ibm.pc,comp.sys.misc,comp.misc
Subject: Please help!
Keywords: IRQ, help, interrupt
Message-ID: <6090@merlin.usc.edu>
Date: 28 Oct 89 04:03:14 GMT
Sender: news@merlin.usc.edu
Reply-To: asplund@castor.usc.edu (Daryl Asplund)
Followup-To: comp.sys.ibm.pc
Distribution: usa
Organization: University of Southern California, Los Angeles, CA
Lines: 19

Can someone please help me?

I would like to determine what IRQ line my LPT2 port is set
to.  I realize that for AT-class machines it (I have a
Compaq '386) should be set to IRQ5.  

The instruction manual that came with the add-in card shows 
that I have a choice of IRQ5 and IRQ7; however, it does not 
tell me which DIP switch configuration is for which IRQ line!

I already have LPT1 set to IRQ7, and would like to make sure
that LPT2 is on IRQ5.  Moving the DIP switches does not seem
to do any harm (or good); so how do I tell what IRQ line the
port is using?

Please reply directly to me at: asplund@castor.usc.edu

Thank you in advance.
--Daryl