Xref: utzoo comp.sys.ibm.pc:36769 comp.periphs:2193 rec.ham-radio:14270
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!pt.cs.cmu.edu!cadre.dsl.pitt.edu!km
From: km@cadre.dsl.pitt.edu (Ken Mitchum)
Newsgroups: comp.sys.ibm.pc,comp.periphs,rec.ham-radio
Subject: Integrand "PC" cabinets
Message-ID: <1989Oct23.203908.23805@cadre.dsl.pitt.edu>
Date: 23 Oct 89 20:39:08 GMT
Organization: Decision Systems Laboratory, Univ. of Pittsburgh, PA.
Lines: 21


In search of better RFI shielding, I am planning on replacing my 286
clone's cabinet with one of the rack mount cabinets from Integrand.
I have used their cabinets before, back in S100 times, and know they
are of high quality.

The only problem I am having is deciding on a configuration. The cabinet
itself is inexpensive ($100), but the custom power supplies that Integrand
sells run around $200 extra. It is difficult to tell from the drawings
supplied by Integrand in its catalog just how difficult it would be to
mount a "standard" supply in the cabinet.

I would appreciate any information anyone has regarding this, particularly
from individuals who have bought raw cabinets from Integrand.


------------------------------------------------------------------------
   Ken Mitchum MD  KY3B
   Decision Systems Labs
   University of Pittsburgh
   km@cadre.dsl.pitt.edu