Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!unhd!lcc770
From: lcc770@uunet!unhd (Layton C Cote)
Newsgroups: comp.sys.amiga
Subject: Re: atari st
Message-ID: <1989Oct23.165531.18529@uunet!unhd>
Date: 23 Oct 89 16:55:31 GMT
References: <2273@nigel.udel.EDU>
Reply-To: lcc770@unhd.UUCP (Layton C Cote)
Organization: Computing Information Services, University of New Hampshire
Lines: 26

In article <2273@nigel.udel.EDU> C05089%AKRONVM.BITNET@cornellc.cit.cornell.edu (don) writes:
>ok, ok, here it is the atari st for the amiga, understand you need a dos disk
> (bla bla bla about the st)

>p.s. you need uuencode and warp to get this one, and after uudecodeing it
               ^^^^^^^^
	      you meant uudecode, of course, right?

>you must rename it i called it atari.warp and it should be atari.wrp!

I tried multiple times to get this file to warp properly, but no luck...
Has anyone managed to uudecode and warp write this properly?
I tried uudecoding it both on our unix(VAX) system where it was posted
and on ami, and the uudecoded files were both the same size,  which was
32170 bytes.  (fine so far)  
   Next after the "short file" message from uudecodeing it, I renamed
it to atari.wrp so warp would be happy.  However it won't warp write past
the first track, which is far too long(like 20000, or some ridiculous
number).  The first two tracks wrote fine though...
  Has anyone got this to warp write fine?????  ( did want to check this out)

-- 

				  ___   		        _  
---UUCP:uunet!unhd!lcc770--------/ //--------------------------| |--------   
|   ____                 ___    / //  /\  /\ /\  | /--\   /\   | |       |\