Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ICAEN.UIOWA.EDU!dbfunk
From: dbfunk@ICAEN.UIOWA.EDU (David B Funk)
Newsgroups: comp.sys.apollo
Subject: Re: Doamin on Ethernet problem
Message-ID: <8910231937.AA00299@icaen.uiowa.edu>
Date: 23 Oct 89 19:27:55 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Iowa Computer Aided Engineering Network, University of Iowa
Lines: 13

I want to clarify my posting <8910210447.AA02085@icaen.uiowa.edu> on
the DDS on Ethernet problem:

> the sr9.7 was OK the sr10.1 was marginal. There are various sr10.1 patches
> out for this but most of them aren't worth messing with. The best solution
> is to get a copy of "/sys/ethernet8_microcode" from a sr10.2 system, even

The sr10.1 patch #m0017 is the patch that "isn't worth messing with".
Patch #m0038 (from tape M68K_8907 or newer) is the same as the sr10.2
release microcode and this one DOES work and should be used.
My Apollogies for any confusion that this caused.

Dave Funk