Path: utzoo!attcan!uunet!snorkelwacker!apple!agate!ucbvax!pro-beagle.cts.com!mmunz
From: mmunz@pro-beagle.cts.com (Mark Munz)
Newsgroups: comp.sys.apple
Subject: Re: Help with AW & UltraMacros
Message-ID: <8910220019.AA05940@trout.nosc.mil>
Date: 21 Oct 89 17:01:54 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 21

Network Comment: to #11914 by mountn.dec.com!memit.dec.com@decuac.dec.com

Subject: Re: UltraMacros


>   Grab the total(s) and transfer them to the spreadsheet. <----HELP!
>
>I've tried creating a report and print to screen, but its unclear that I
{>can pull off data from this.  I also haven't figured out if I can report
>only the totals (summary only as in awgs) so that I can print to clipboard
>adn then pull them into the spreadsheet.
>
>Any thoughts or suggestions are appreciated.....Chris

 You can use the SCREEN command to scan the screen after printing a
 report to the screen (with totals). You'll have to do some playing as
 to where it is on the screen (all depends on the report format).

 Once you get the value, you can then transfer it over to the Spreadsheet.

Mark Munz