Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!ginosko!uunet!zephyr.ens.tek.com!tektronix!reed!busker!p8.f14.n105.z1.FIDONET.ORG!Howard.Spindel
From: Howard.Spindel@p8.f14.n105.z1.FIDONET.ORG (Howard Spindel)
Newsgroups: comp.sys.ibm.pc
Subject: Two Hard Disk Controllers in One Machine
Message-ID: <1092.25455B8D@busker.FIDONET.ORG>
Date: 24 Oct 89 23:43:34 GMT
Sender: ufgate@busker.FIDONET.ORG (newsout1.26)
Organization: FidoNet node 1:105/14.8 - Busker's Boneyard, Portland OR
Lines: 14

Has anyone installed two hard disk controllers (one MFM and one
either SCSI or ESDI) in a single IBM AT under DOS?  Is this even
possible or do the port addresses conflict?  What software drivers
are needed to make it work?
 
Eschew Sesquipedalian Obfuscation!
Usenet:     Howard.Spindel@p8.f14.n105.z1.FIDONET.ORG
Fidonet:    1:105/14.8


--  
Howard Spindel - via FidoNet node 1:105/14
	    UUCP: ...!{uunet!oresoft, tektronix!reed}!busker!14.8!Howard.Spindel
	    ARPA: Howard.Spindel@p8.f14.n105.z1.FIDONET.ORG