Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!mcsun!sunic!tut!ra!chyde!ts
From: ts@chyde.uwasa.fi (Timo Salmi LASK)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Good Vt100 emulator
Message-ID: <1007@chyde.uwasa.fi>
Date: 27 Oct 89 10:47:35 GMT
References: <900@micropen> <4328@ncsuvx.ncsu.edu>
Reply-To: ts@chyde.uwasa.fi (Timo Salmi LASK)
Organization: U of Vaasa, Finland
Lines: 20

In article <4328@ncsuvx.ncsu.edu> noble@shumv1.ncsu.edu (Patrick Brewer) writes:
>
>	Does anyone out there know of a good VT100 emulator? I am looking 
>   for something that is low cost or free. All I want is use of all keys,
>   function keys, cursor, keypad. I have seen some that offer keypad keys
>   but not function keys. I think there must be one some were that sends
>   all the codes that an actual VT100 would.

MsKermit, Procomm, and Telix have these features.  Of these MsKermit
is the most configurable.  You can get any of them by anonymous ftp
from your site.  If you also want a ready MsKermit VT100 keyboard,
get /pc/ts/tskerm20.arc as well.  If you want Procomm information
and layouts then get /pc/ts/tspfon29.arc.  (If you are not familiar
with anynymous ftp, that is the File Transfer Program, please
consult your system manager.)

...................................................................
Prof. Timo Salmi                                (Site 128.214.12.3)
School of Business Studies, University of Vaasa, SF-65101, Finland
Internet: ts@chyde.uwasa.fi Funet: vakk::salmi Bitnet: salmi@finfun