Path: utzoo!yunexus!maccs!cs4g6aw
From: cs4g6aw@maccs.dcss.mcmaster.ca (Amos Yung)
Newsgroups: comp.sys.ibm.pc
Subject: re: UART problem
Message-ID: <25492A50.28682@maccs.dcss.mcmaster.ca>
Date: 28 Oct 89 04:25:52 GMT
Article-I.D.: maccs.25492A50.28682
Reply-To: cs4g6aw@maccs.dcss.mcmaster.ca (Amos Yung)
Organization: McMaster University, Hamilton, Ontario
Lines: 21

In Oct 21,89, I posted a quest for help : 

>>I am currently doing a project that involves the programming of the UART 
>>in a IBM-PC (so that the serial port can interrupt the CPU when it 
>>receives a non-standard signal)...

Since then, I have received more than a dozen sound advice. A gentlement 
in California even offer to send me a photocopy of a portion of the IBM
tech. manual. (But since it would be kind of silly to send him a check
for the photocopy cost and the postage, I would have to decline such a
generous offer). Now I am able to get on with my project. And I owe it to
all you wonderful people out there.

Once again, please accept my whole hearted appreciation.


-- 
						Amos Yung
						McMaster University,
						Hamilton, Ontario,
						Canada.