Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!sunybcs!nsscb!ameyer From: ameyer@nsscb.UUCP (Andy Meyer) Newsgroups: comp.sys.tandy Subject: Re: Tandy 100 Disk drive (Chipmunk) question Summary: Can't Continue may not be a drive problem. Message-ID: <1035@nsscb.UUCP> Date: 27 Oct 89 14:10:41 GMT References: Reply-To: ameyer@nsscb.UUCP (Andy Meyer) Organization: AT&T NSSC; S. Plainfield, NJ Lines: 22 In article lv08+@andrew.cmu.edu (Lili Velez) writes: > I have a Tandy 100 with an external Chipmunk drive from the Portable > Computer Support > Group, and I'm getting "Can't Continue" errors. Do you know (or do you > know the email > address of anyone who might..) if there are any retrieval programs for > such problems? Is there some reason you suspect the drive? Do you get "Can't Continue" errors without it? What are you doing when you get them? Normally, a "Can't Continue" error occurs when you have been running a program and you interrupt it (either with ^C or a STOP), then modify the program (ie. edit one or more lines) and then try to continue (using either CONT or GOTO). Andy -- Andreas Meyer N2FYE AT&T National Systems Support Center .--- ..- ... - ... .- -.-- -. --- - --- -- ... -.. --- ... uucp: ..!sunybcs!nsscb!ameyer or: ameyer%nsscb@sunybcs.cs.buffalo.edu