Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!rpi!batcomputer!hurf From: hurf@batcomputer.tn.cornell.edu (Hurf Sheldon) Newsgroups: comp.unix.ultrix Subject: TN3270 on DS3100 working Keywords: TN3270, DS3100, Pmax, compiling, ftp Message-ID: <9149@batcomputer.tn.cornell.edu> Date: 26 Oct 89 14:18:39 GMT Reply-To: hurf@tcgould.tn.cornell.edu (Hurf Sheldon) Organization: Cornell Theory Center, Cornell University, Ithaca NY Lines: 51 There was some interest in this from all corners of the globe... With help from a few people from the tn3270 list (tn3270@terminus.umd.edu) I have it working. The following was done: ../telnet/Source/tn3270.c put #if ((!defined(mips))) around the putchar routine.. #if ((!define(NOT43)) ... (thanks skapur@ccmail.sunysb.edu) ctlr/api.h added '|| (MIPSEL)' to the byte order check (line 333) [Probably should add ' || (MIPSEB) ' to the next check] edited makefile to reflect a different install scheme and to put ../etc/map3270 in /etc changed the 'thisdepend' rule so it worked and put 'mkdep' in this directory. (thanks jch@sonne.tn.cornell.edu) Used ../telnet/Makefile_ultrix instead of ../telnet/Makefile I don't have the map file working so the enter key is read correctly - use ^Z - Interestingly this works fine on a vax rlogged into from the Pmax (termcap maybe?) Will diff a std directory so you can use patch to do all the work and post it soon. - Meanwhile on bimbo.tn.cornell.edu (128.84.253.208) for anon ftp in pub -rw-r--r-- 1 0 0 652612 Oct 26 09:55 mips.tn3270.tar.Z Just unpacking, editing tn3270/makefile to reflect your own installation preferences and typing 'make' or 'make install' should build a working tn3270 on a Pmax. Read the README.CORNELL.LPS Built mine under Ultrix3.1-UWS2.1... hurf -- Hurf Sheldon Network: hurf@ionvax.tn.cornell.edu Lab of Plasma Studies Bitnet: hurf@CRNLION 369 Upson Hall, Cornell University, Ithaca, N.Y. 14853 ph:607 255 7267 I got a job in science; I bought a Porsche; Now, everyone takes me seriously.