Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!lll-winken!tekbspa!optilink!elliott
From: elliott@optilink.UUCP (Paul Elliott x225)
Newsgroups: sci.electronics
Subject: Re: PC-AT bus
Summary: PCC / AT bus specs... Faraday
Message-ID: <2530@optilink.UUCP>
Date: 23 Oct 89 20:47:30 GMT
References: <24842@andante.UUCP> <27827@amdcad.AMD.COM>
Distribution: usa
Organization: Optilink Corporation, Petaluma, CA
Lines: 17

> In article <24842@andante.UUCP> geno@andante.UUCP (Geno Rice) writes:
> |Can anyone point me to a detailed description of the PC-AT bus?
> |
> |I need the definitions of the various signals together with min and max
> |timing specifications and set-up and hold requirements.
> 
Faraday (Electronics ?), the makers of PC-clone motherboards for OEM use,
will send a catalog which includes a bus description section (not really a 
spec).  It is skimpy on the full timing specs, but does have some useful
data in it.



-- 
Paul M. Elliott      Optilink Corporation     (707) 795-9444
         {pyramid,pixar,tekbspa}!optilink!elliott
"I used to think I was indecisive, but now I'm not so sure."