Xref: utzoo comp.sys.amiga:42862 comp.sys.amiga.tech:7961
Path: utzoo!attcan!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!tut.cis.ohio-state.edu!bloom-beacon!eru!luth!d87-khd
From: d87-khd@sm.luth.se (Karl-Gunnar Hultland)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: CLI/WB and ASSEMBLER
Message-ID: <629@tau.sm.luth.se>
Date: 1 Nov 89 19:24:15 GMT
Reply-To: Karl-Gunnar Hultland <d87-khd@sm.luth.se>
Followup-To: comp.sys.amiga
Organization: University of Lulea, Sweden
Lines: 19
UUCP-Path: {uunet,mcvax}!sunic!sm.luth.se!d87-khd


I'm trying to write a small utility using DEVPAC 2 and
I have some problems getting parameters from CLI into my
program.
What I need to know is
1) Which registers are set to the parameters ( if any at all)
2) What are the differences between CLI and WB from the assembly
   language programmers view.

					Karl

<$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$>
< Karl 'Kalle' Hultland    <$>                                               >
< Dept. of Comp. sci.      <$> d87-khd@sm.luth.se |                          >
< University of Lulea      <$> {uunet,mcvax}!sunic.se!sm.luth.se!d87-khd     >
< Sweden                   <$>                                               >
<$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$>
<      If two people agree on EVERYTHING , one of them is OBSOLETE!!         >
<$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$><$>