Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!dsac!dsacg2!nor1675
From: nor1675@dsacg2.UUCP (Michael Figg)
Newsgroups: comp.sys.amiga
Subject: Re: Missing k directive
Summary: Csh
Message-ID: <754@dsacg2.UUCP>
Date: 1 Nov 89 14:25:25 GMT
References: <15503@bloom-beacon.MIT.EDU> <1105@forty2.UUCP>
Organization: Defense Logistics Agency Systems Automation Center, Columbus
Lines: 17

In article <1105@forty2.UUCP>, claudio@forty2.UUCP (Claudio Nieder) writes:
> I have some similar problems now with my Shell-Startup. I added 3-4 aliases
> and changed the prompt definition from the original 1.3 Shell-Startup.
> Now I get the missig k directive error whenever I start the Shell

I also got this message while trying to start Csh from the workbench a
couple of weeks ago. It was shortly after rebuilding my harddrive as a 
result of multiple hardware problems. I don't remember what I did to 
correct this, and if it really was 'Csh' (I also use Wsh and the ARP shell
but usually Csh). Am curious also what this 'k directive' is.

					 Thanks,


-- 
"Hot Damn! Groat Cakes Again  |  Michael Figg
Heavy on the thirty weight!"  |  DLA Systems Automation Center - Columbus,Oh