Xref: utzoo comp.sys.amiga.tech:8062 comp.sys.amiga:43282
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!quanta.eng.ohio-state.edu!kaa.eng.ohio-state.edu!dirks
From: dirks@kaa.eng.ohio-state.edu (William R.Dirks)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Alegra 2Meg For Sale  (was LUCAS woes)
Summary: Buy memory!
Keywords: LUCAS, Alegra, sale, buy
Message-ID: <3446@quanta.eng.ohio-state.edu>
Date: 8 Nov 89 10:04:47 GMT
Sender: news@quanta.eng.ohio-state.edu
Reply-To: dirks@kaa.eng.ohio-state.edu (William R.Dirks)
Organization: The Ohio State University Dept of Electrical Engineering
Lines: 30

A while back I asked the good folks of comp.sys.amiga.tech for help getting
my LUCAS working.  Well, this afternoon I finally got it working, and I am
soooo pleased! :-) :-)   Thanks again to those who responded; you know who
you are! :-)  

The problem was a bad 68020.  It fooled me into thinking it was OK by
flashing the power light before it hung up. 1/2 :-)   I got the 68020 (and
it's replacement) from Krueger, BTW.  That was the only problem I had with
LUCAS (if you don't count playing with U9).  This evening I installed
FRANCES and it's working fine. |-)  But LUCAS doesn't work with my Alegra,
so:

	2 Megabyte Alegra For Sale   ---    US$250.00  or best offer.

If you're not familiar with the Alegra:

	. Goes on A1000 side expansion connector
	. NO PASS THROUGH
	. Auto-config, no wait-state
	. Sturdy, compact metal case: flush with Amiga case at the top,
	  bottom and rear. Comes forward to just behind the rear joystick
	  port. About 1/2 inch thick.

I'll pay for shipping.  Just tell me where to send it.  :-)

Respond via E-mail.
-=-
Bill Dirks					 ...a large iron bar
						suspended across a vast
dirks@kaa.eng.ohio-state.edu			 multitude of grapes...