Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!agate!garnet.berkeley.edu!danny
From: danny@garnet.berkeley.edu (Danny Lee)
Newsgroups: comp.sys.ibm.pc
Subject: Help Installing ST4096 in AT
Keywords: Hard drive, install, AT, partition
Message-ID: <1989Nov1.115806.12645@agate.berkeley.edu>
Date: 1 Nov 89 11:58:06 GMT
Sender: usenet@agate.berkeley.edu (USENET Administrator;;;;ZU44)
Reply-To: danny@garnet.berkeley.edu (Danny Lee)
Distribution: usa
Organization: University of California, Berkeley
Lines: 24



	Hi there!  I've got a Seagate ST4096 drive that needs to be
installed in an IBM AT.  I am looking for some info regarding its
drive type so that I can partition and format it without using a
third party's partitioning software.  Is this even possible?  The
reason being that this AT will be running Microsoft Windows 2.11
most of the time and it would be nice to be able to use their
disk caching driver Smartdrv.sys (which causes problems with
partioning software such as SpeedStor).  ANY help and/or pointers
will be appreciated.

	BTW, the exact setup of the AT is as follows:

		512K on the motherboard (8 mhz)
		2048 expanded memory vi an Above Board
		ATI VIP VGA card
		Microsoft Mouse
		
	Thanks in advance !!

Danny Lee
danny@garnet.berkeley.edu
(415) 548-2173