Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!crdgw1!crdos1!davidsen
From: davidsen@crdos1.crd.ge.COM (Wm E Davidsen Jr)
Newsgroups: comp.graphics
Subject: Re: Graphics card recommandation for NEC Multisync XL needed
Message-ID: <1585@crdos1.crd.ge.COM>
Date: 9 Nov 89 19:10:38 GMT
References: <209@mojo.UUCP> <7.UUL1.3#5526@laczko.UUCP>
Reply-To: davidsen@crdos1.UUCP (bill davidsen)
Organization: GE Corp R&D Center
Lines: 20

In article <7.UUL1.3#5526@laczko.UUCP>, frank@laczko.UUCP (Frank L. Laczko) writes:

|  > Recommandations needed for a graphics card for Multisync XL ((19")
|  > monitor. It will be used in a 386/20 w/8mb of RAM, working in AutoCAD
|  > Rel. 10 most of the time. Speed is essential.
|   I have been using a Video Seven Vram card with 512KB memory with quite
|  good results.

  This is a good choice. The "VGAwonder" has been reviewed by several
magazines, and seems to be slightly slower (3-5%), cheaper, and has
additional modes. Only you can decide if the price or features balance
the speed considerations, but I thought you might like to know. A
friend of mine just made this same decision, so I had quick access to
the info.

-- 
bill davidsen	(davidsen@crdos1.crd.GE.COM -or- uunet!crdgw1!crdos1!davidsen)
"The world is filled with fools. They blindly follow their so-called
'reason' in the face of the church and common sense. Any fool can see
that the world is flat!" - anon