Path: utzoo!censor!geac!jtsv16!uunet!cs.utexas.edu!samsung!usc!snorkelwacker!bloom-beacon!eru!luth!sunic!tut!kv56962 From: kv56962@tut.fi (V{{r{nen Kari) Newsgroups: comp.periphs.printers Subject: Problem with HP7600 -plotter Message-ID: Date: 8 Nov 89 18:32:08 GMT Organization: Tampere Univ. of Technology, Finland. Lines: 19 We have found a problem with a HP7600 series electrostatic plotter. If you send another drawing to it while it is still drawing the previous one, it forgets to draw some vectors. We are using Centronics cable to connect our Sun 386i to it. I suppose the handshakes are ok, because all pictures are drawn correctly if sent there on their own. I contacted the Hewlett Packard of Finland, but they told me that their hardware never has any faults... :-) Will you, please, email me. I'll summarize if needed... -- SO LONG AND THANKS FOR ALL THE FISH (The dolphins) Kari Vaaranen Tampere University of Technology Majakkakatu 30, kv56962@tut.fi SF-33410 Tampere, FINLAND (These opinions are mine and mine ONLY!)