Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!rutgers!cmcl2!nrl-cmf!think!cs.utexas.edu!uunet!mcsun!sunic!nuug!ulrik!inger!x_hausken_p
From: x_hausken_p@inger.uio.no (Peter Hausken)
Newsgroups: comp.protocols.nfs
Subject: Reactivating PC-NFS
Message-ID: <79@inger.uio.no>
Date: 15 Nov 89 12:36:10 GMT
Lines: 19


I need a way to reactivate PC-NFS when my Toshiba T1600 with a PDT8023 card 
from Pure Data has been turned of. Because of the battery, everything comes
back where I left it and there is no need for a reboot, exept for PC-NFS 
which is "dead" after the power has been off.

It's the same problem as if I use NCSA Telnet on any other ethernetcard
than 3C501. After NCSA Telnet, or other programs who use the Ethernet card
have been used, PC-NFS drives and printers are unreachable.

Does anyone know a way to reactivate PC-NFS ?


----------------------------------------------------------------------------
    ///////  //  //   Peter Hausken, University of Oslo
   //   //  //  //    PB. 1059, Blindern, N-0316 OSLO 3, Norway
  ///////  //////     
 //       //  //      Internet: peterh@ifi.uio.no
//       //  //