Path: utzoo!attcan!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!mcsun!cernvax!ethz!visinfo
From: visinfo@ethz.UUCP (VISINFO Moderators)
Newsgroups: comp.sys.amiga
Subject: Re: Another 1.4 request .
Summary: 60 Hz on PAL Amigas discussion continues....
Keywords: 60 Hz 50 Hz PAL NTSC
Message-ID: <2495@ethz.UUCP>
Date: 13 Nov 89 12:55:20 GMT
References: <3728@nigel.udel.EDU>
Reply-To: visinfo@bernina.ethz.ch.UUCP (VISINFO Moderators)
Organization: ETH Zuerich, Switzerland
Lines: 31

In article <3728@nigel.udel.EDU> THOMAS%HUJIDS.BITNET@cunyvm.cuny.edu (Thomas Shimko) writes:

>P.S What happened to all those rumors of a program that would let Pal users
>switch to NTSC resolution ?

Sorry to all who waited for a answer or a continuation of the discussions
I started about the 60 Hz Emulator and the SCSI stuff, but in the last
three month I could not access this UNIX system because I wasn't in Zurich.
Feel free to start the discussion again and ask everything about these things.

Current situation:

60 Hz Emulator: It works just great and my friend is going to release it.
We are now looking for a software company that will release the POWER UTILITY.
This is a bit difficult here in Switzerland because there are very few
companys that distribute utilities. If there are any companys on the Net
which are interested in distributing the POWER UTILITY please e-mail.

SCSI stuff: It works, but I have to remove some bugs we found out. I still
haven't had enough time to write something like PREP to write the boot
information on the HD after low-level formatting. This is a real problem,
because you loose the Interleave formatted with SCSIformat when you do
PREP. I will work on this as soon as I can. Probably I will release these
utilities very soon without something like PREP for advanced HD users.


/* -------------------------- SG (Simeon Graphics) ---------------------- */
/* Peter Simeon             |       //                             //     */
/* UUCP: ...visinfo@bernina |      //    Long live the AMIGA!     //      */
/* BIX:  hardwiz            |    \X/                            \X/       */
/* ---------------------------------------------------------------------- */